• Why Is Back Priming Recommended?

    First of all lets explain, what is back priming? It simply means coating the backside of wood siding with one coat of NatureColor® Base Coat or NatureOne® before putting the siding up.

    READ MORE
  • Where to Use NatureColor® Base Coat and Recoater

    NatureColor® Base Coat
    – First and Second Coat in the recommended three-coat siding system
    – Decks and Railings
    – Trim 
    – Entry Doors and Garage Doors

    READ MORE
  • When to Apply a Maintenance Coat

    On rough sawn surfaces look for a lightening in color around flat grain and knot areas. Often times a light tan color develops around the knots. On smooth wood weathering indicators are more subtle

    READ MORE
  • Translucent Finish vs. Mother Nature

    Staining wood is a common practice that you can do to update a wood structure. However, while wood staining might seem easy on a small scale, staining an entire log home requires special attention. To best apply log home wood stain to your home, here are some great tips and tricks.

    READ MORE
  • Mill Glaze

    Mill Glaze is a phenomenon that occurs during the milling process of the wood. Wood generally has an open porous cell structure that is very accepting of wood finishes. This porous structure is altered during the planing process that makes the wood glossy smooth or mill glazed.

    Blades on these planners rotate at very high speeds and crush the open cell structure, which transforms it into a closed structure that prevents the penetration of any coating. To achieve maximum bond of our coatings to the wood we recommend that the “mill glaze” be removed by sanding or applying TSP, bleach and water solution and then lightly power washing the surface.

    READ MORE

"I can’t find a better product to put on a customer's project. The acrylic is great if you’re patient with it!
We only buy about 250 gallons a year, and we would love to double that!"

— Nathan Kingbird (Facebook Review)